CC2640F128RHBR

The CC2640F128RHBR is a wireless MCU that is specifically designed for Bluetooth applications. It's part of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. With its very low active RF and MCU current, as well as low-power mode current consumption, the CC2640 device offers exceptional battery lifetime and is able to operate on small coin cell batteries and in energy-harvesting applications. Its 32-bit ARM Cortex-M3 processor runs at 48 MHz and is complemented by a rich peripheral feature set, including a unique ultralow power sensor controller. This sensor controller is perfect for interfacing external sensors and collecting analog and digital data autonomously while the rest of the system is in sleep mode. This makes the CC2640 device well-suited for a wide range of applications where long battery lifetime, small form factor, and ease of use are important

主な特長

• Microcontroller
  • Powerful ARM^® Cortex^®-M3
  • EEMBC CoreMark^® Score: 142
  • Up to 48-MHz Clock Speed
  • 128KB of In-System Programmable Flash
  • 8KB of SRAM for Cache
  • 20KB of Ultralow-Leakage SRAM
  • 2-Pin cJTAG and JTAG Debugging
  • Supports Over-The-Air Upgrade (OTA)
• Ultralow-Power Sensor Controller
  • Can Run Autonomous From the Rest of the System
  • 16-Bit Architecture
  • 2KB of Ultralow-Leakage SRAM for Code and Data
• Efficient Code Size Architecture, Placing Drivers, Bluetooth^® Low Energy Controller, and Bootloader in ROM
• RoHS-Compliant Packages
  • 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
  • 5-mm × 5-mm RHB VQFN32 (15 GPIOs)
  • 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
• Peripherals
  • All Digital Peripheral Pins Can Be Routed to Any GPIO
  • Four General-Purpose Timer Modules
    (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
  • 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
  • Continuous Time Comparator
  • Ultralow-Power Analog Comparator
  • Programmable Current Source
  • UART
  • 2× SSI (SPI, MICROWIRE, TI)
  • I2C
  • I2S
  • Real-Time Clock (RTC)
  • AES-128 Security Module
  • True Random Number Generator (TRNG)
  • 10, 15, or 31 GPIOs, Depending on Package Option
  • Support for Eight Capacitive-Sensing Buttons
  • Integrated Temperature Sensor
• External System
  • On-Chip internal DC-DC Converter
  • Very Few External Components
  • Seamless Integration With the SimpleLink™ CC2590 and CC2592 Range Extenders
  • Pin Compatible With the SimpleLink CC13xx in 4-mm × 4-mm and 5-mm × 5-mm VQFN Packages
• Low Power
  • Wide Supply Voltage Range
    • Normal Operation: 1.8 to 3.8 V
    • External Regulator Mode: 1.7 to 1.95 V
  • Active-Mode RX: 5.9 mA
  • Active-Mode TX at 0 dBm: 6.1 mA
  • Active-Mode TX at +5 dBm: 9.1 mA
  • Active-Mode MCU: 61 µA/MHz
  • Active-Mode MCU: 48.5 CoreMark/mA
  • Active-Mode Sensor Controller: 8.2 µA/MHz
  • Standby: 1 µA (RTC Running and RAM/CPU Retention)
  • Shutdown: 100 nA (Wake Up on External Events)
• RF Section
  • 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 4.2 Specification
  • Excellent Receiver Sensitivity (–97 dBm for BLE), Selectivity, and Blocking Performance
  • Link budget of 102 dB for BLE
  • Programmable Output Power up to +5 dBm
  • Single-Ended or Differential RF Interface
  • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
    • ETSI EN 300 328 (Europe)
    • EN 300 440 Class 2 (Europe)
    • FCC CFR47 Part 15 (US)
    • ARIB STD-T66 (Japan)
• Tools and Development Environment
  • Full-Feature and Low-Cost Development Kits
  • Multiple Reference Designs for Different RF Configurations
  • Packet Sniffer PC Software
  • Sensor Controller Studio
  • SmartRF™ Studio
  • SmartRF Flash Programmer 2
  • IAR Embedded Workbench^® for ARM
  • Code Composer Studio™

All trademarks are the property of their respective owners.