• SN65176BDR SOIC-8
SN65176BDR SOIC-8

SN65176BDR

Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC T/R

数量 単価(USD) 合計金額
5 $0.228 $1.14
50 $0.187 $9.35
150 $0.169 $25.35
500 $0.147 $73.50
2500 $0.117 $292.50
5000 $0.111 $555.00

在庫：4,078

*価格は参考値です。
  • 90日間のアフター保証
  • 365日の品質保証
  • 正規品保証
  • 7*24時間サービス検疫

  • 部品番号 : SN65176BDR

  • パッケージ/ケース : SOIC-8

  • ブランド : UMW

  • コンポーネントのカテゴリ : Drivers, Receivers, Transceivers

  • 日付シート : SN65176BDR データシート (PDF)

クイックお問い合わせ

RFQを提出してください SN65176BDR またはメールでご連絡ください: Email: [email protected], 12時間以内にご連絡させていただきます。

概要 SN65176BDR

The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.

The SN65176B and SN75176B devices combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.

The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.

SN65176BDR

主な特長

  • Bidirectional transceivers
  • Meet or exceed the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27
  • Designed for multipoint transmission on long bus lines in noisy environments
  • 3-State driver and receiver outputs
  • Individual driver and receiver enables
  • Wide positive and negative input/output bus voltage ranges
  • ± 60-mA Maximum driver output capability
  • Thermal shutdown protection
  • Driver positive and negative current limiting
  • 12-kΩ Minimum Receiver Input Impedance
  • ± 200-mV Receiver input sensitivity
  • 50-mV Typical receiver input hysteresis
  • Operate from single 5-V supply

応用

  • Communications & Networking, Sensing & Instrumentation, Motor Drive & Control, Wireless, Consumer Electronics, Portable Devices

仕様

以下は、選択された部品の特性やカテゴリーに関する基本的なパラメータである。

Number of receivers 1 Number of transmitters 1
Duplex Half Supply voltage (nom) (V) 5
Signaling rate (max) (MBits) 10 IEC 61000-4-2 contact (±V) None
Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12
Number of nodes 32 Isolated No
Supply current (max) (µA) 70000 Rating Catalog
Operating temperature range (°C) -40 to 105

保証と返品

保証、返品、および追加情報

  • QAと返品ポリシー

    部品の品質保証: 365 日

    返品・返金：90日以内

    返品・交換：90日以内

  • 配送と梱包

    配送: たとえば、FedEx、SF、UPS、または DHL.UPS、または DHL。

    部品のパッケージング保証: 100% ESD 帯電防止保護を特徴とする当社のパッケージングには、高い靭性と優れた緩衝機能が組み込まれています。

  • 支払い

    たとえば、VISA、MasterCard、UnionPay、Western Union、PayPal などのチャネルです。

    特定の支払いチャネルの好みや要件がある場合は、当社の営業チームにご連絡ください。

類似商品

ADM232AARNZ

ADM232AARNZ

Dual Transmitter/Receiver RS-232 16-Pin SOIC N Tube